Paneer Cutting Machine

• This machine is use for Cutting and dicing of Paneer as per the Customer Requirements.

The Paneer blocks (After removal of moisture) are kept at the top of Nylon/Derlin blocks, which are provided with suitable slots for
allowing the top cutter to move freely on the surface. The Pneumatic cylinder is then pushes the block to the top of the chamber. The
SS blades are provided at the bottom of the chamber. When the Paneer block is pressed with Pneumatic cylinder, the blades cut the
Paneer as per the requirement. This can be pushed by another Pneumatic cylinder through a SS chute and the cut Paneer pieces are
collected by the customer.
If the dicing has to be done, then the cut pieces of the Paneer are pushed horizontally by another pneumatic cylinder to outlet section
of Dicer. As per the requirements of the dicing, suitable sizes of wires/cutters are permanently fixed with proper stiffeners. When the
cut pieces are pressed against the cutters, the required pieces as per the requirement are dropped to another chute for collection.
This machine uses three pneumatic cylinders for various applications, like pushing vertically, pushing horizontally for slicing as well
as dicing

• The machine is made from SS 304 & the cutters are made from annealed & hardned steel.
• The machine is mounted on suitable SS skid frame with 4 nos. heavy duty castor wheel
  for easy movement.
• The CIP provisoin is provided for easy cleaning of the system components.
• The Complete mahine is covered in all sides by Poly Acrylinc Sheet.
• The Opening & Closing of the doors is user friendly.
• All the Components of this machine is polished and asthetic view is maintained.