DESCRIPTION
-
The Filled crate conveyor runs parallel to the Empty conveyor & is placed on the leading end of the crate indexing conveyors.
-
The function of Filled conveyor is to take up filled crates from all indexing conveyor & move them to the Cold Room. Alongside the Filled conveyor.
-
The movement of crates is controlled on this through sensors & pneumatic actuators/stoppers to avoid any interference or collision of crates while entering the highway from Satellite conveyors.
-
Complete Automatic conveyor system is fully run by pre-programmed PLC system. This PLC system is capable of communication with the main SCADA system for signal transfers. HMI is provided along with PLC for operation of the entire packing line. It is possible to run 1, 2 or all 3 machines together or separately as required.
-
This conveyor clubs the packs as required by the discharge conveyor. It also retracts to deliver the packs. This conveyor is controlled by servo motors. This belt conveyor is with timing belt and is adjustable at site for fine tuning. One end of this Belt Conveyor is the receiving conveyor & the other end is connected to the discharge conveyor placed in 90 Deg angle. This conveyor is located between empty and filled crate highway conveyors.
-
This conveyor receives the filled packs as soon as they are discharged from the machine chute. The conveyor senses the packs and aligns them. The conveyor runs by a servo motor. This Belt Conveyor is placed above the level of Filled crate conveyor. One end of Belt Conveyor is placed below the spout of filling station & the other end is connected to the indexing conveyor. This conveyor is equipped with pouch counter and it is displayed on the PLC.